Skip to content
🎉 Buy for 60€ and get FREE SHIPPING 🎉
🎉 Buy for 60€ and get FREE SHIPPING 🎉

Language

A quick guide to our paper wall stickers

Our paper wall stickers feel and look just like traditional wallpaper. The stickers are produced from FSC-certified paper and heat printed with water-based and solvent-free colours. We produce all stickers ourselves in our shop in Helsinki.

Use them for:

  • Clean and even well painted indoor walls

Not suitable for:

  • Outdoor use
  • Wet spaces (paper does not like water)
  • Uneven surfaces

    Part 1. Prepare:

    If your wall sticker is made of several parts, we recommend you cut the sheet and use masking tape to arrange the stickers on the wall before attaching them. This way you can easily see how your design looks and move things around without unnecessary peeling of the stickers.


    Part 2. Attaching the stickers:

    Attaching our wall stickers is as easy as eating pie!

    1. Make sure your surface is even and clean
    2. Carefully peel the stickers from the backing sheet
    3. Stick them on the wall
    4. Remove and reposition where needed

    Part 3. Re-positioning the stickers:

    You can easily reposition the decals few times (just make sure you peel them off carefully to avoid any ripping). 

    Please note that the adhesive hardens slightly after the first 48 hours on the wall. So if you need to reposition them, we recommend that you do it as soon as possible after installation. This especially applies to our bigger wall stickers, which will become more difficult to reposition as time passes. 


    Part 4. Removing the stickers:

    We recommend peeling off the stickers as carefully and slowly as possible. If the wall is clean and the stickers have been attached for a short time, you are most likely able to reuse them again on another surface.

    If it seems that the stickers have got very stuck, use a hair dryer or heat gun to warm up the stickers before slowly peeling them off. Heat makes the adhesive both soft and elastic, making removal much easier. 


    Part 5. Problem solving 

    Help, my stickers are curling and/or peeling off the wall

    Firstly we want to be very clear, we always make up for any stickers that fail to stick - so no worry, we got your back on this one!

    Because there are unlimited combinations of different paints and walls out there, it is very possible that sometimes there will be issues with the stickers not sticking as they should. This is simply because the sticker adhesive needs to be soft enough to still come off easily.

    What to do if the edges of the stickers are curling:

    Sometimes it might happen that the edges of the stickers start to curl off after installation. This happens if the natural force of the paper curling is stronger than the adhesion to the wall. The adhesive then gets in touch with air, and hardens - making it more difficult to press them back and keep them attached. If you have any problems with curling edges, follow these instructions:

    1. With a hair dryer on max setting, warm up the sticker/adhesive where the curling occurs. 
    2. When you can feel that the sticker is clearly warm, just press all the parts back on the wall. They should stick and this time remain attached. 
    3. The reason for this is that the heat makes the adhesive softer and more elastic, making it stick better. The adhesive needs to remain attached to the wall for 12-48 hours for it to harden enough to remain stuck. By heating up the adhesive you are making it temporarily adhere better, giving it the time it needs to strengthen the bond and remain on the wall. 

    If the tip above is not helping or the sticker completely comes off, then it might simply be that the wall is too uneven or there is some issue with the paint. We are always here for you, so don’t hesitate to get in touch if this happens. 

    Help, my stickers are peeling the paint off

    While very rare, it is possible that the stickers might peel off paint when removed. This is simply due to the fact that there are unlimited combinations of paints and walls out there, all unique in their own way. Many different factors can affect how well the paint is adhering to the wall, and sometimes it might be almost impossible just by looking at it to guess how well the paint is attached. If you have any issues with peeling paint, follow these instructions:

    1. With a hair dryer on max setting, warm up the stickers as much as you are able to. If you are using a heat gun, use lower heat.
    2. When you can feel that the sticker is warm, slowly start to peel it off while continuing to heat up the next part of the sticker. 
    3. The adhesive becomes more elastic when warm, and much easier to peel off. You should both feel and see a clear difference compared to before.

    Please get in touch with us, if you had any problems with removing the stickers so that we can make it up for you.